3 Circuit Track
|
Installation of 3 Circuits Track Adaptor |
||
 |
 |
 |
|
1.Turn dial to "off" position 2.Switch lever to open |
Insert tract adaptor |
1.Switch kever and lock in place 2.Turn dial to number selection |
 |
||
|
Removing 3 Circuits Track Adaptor |
||
 |
 |
|
1.Turn dial to off position 2.Switch lever to open |
Remove tract adaptor angle from dial end of adaptor |
|
|
|
|
4-Wire Track Lighting Checklist When planning your requirements prepare a layout to ensure correct selection of components. Examples are provided to assist with your planning. Be aware of left/right options for your live ends and elbow joiners. Ensure guide lug on track aligns with live end. To secure connectors to track use lock screws and ensure end cap(s) affixed securely to safely terminate track end(s). |
|
|
|
|
| Example1-Basic Straight Option | |
 |
Ensure guide lug on track aligns with live end. As track has no direction it can be reversed to line up with live end. |
|
|
|
|
Example2-Squre Track Option |
|
 |
In this example consistent EJ joiners used in the square to en-sure neutral (green line) is maintained throughout the run. |
|
|
|
|
Example3-Left/Right Angles Option |
|
 |
In this example different EJ joiners are used to ensure neutral (green line) is maintained throughout the run. |